Shiplap Backsplash

Emily Medlock is a freelance writer, published author, and certified life coach. Her passion is in home improvement, historical fiction, interior design, and helping others.

A shiplap kitchen backsplash is something you need to learn about soon. After all, the kitchen is the most popular room to remodel, according to the National Association of Homebuilders. So, chances are, if you remodel a room, it will be the kitchen.

One easy thing you can do to your kitchen is to add a backsplash. Adding a backsplash to your kitchen is one of the best things you can do for it. Not only does it look amazing, but it can up the value of your home substantially.

How To Get The Shiplap Look For Cheap

Backsplashes are layers of material that are often put on the wall between the countertops and the above cabinets or ceiling. They are found in the bathroom and the kitchen but are most commonly added to kitchens.

You can install a backsplash yourself with tile or another material, or have a professional contractor do it for you. Either way, adding a backsplash can be the best thing you do for your kitchen and its resale value.

While most backsplashes are made from tile, you can make them out of anything that you want to make them out of. Shiplap is a great alternative to tile that looks just as good, and sometimes even better.

Vertical Shiplap Walls + Diy Ideas

The average cost of shiplap is around $4 per square foot but ranges from $2 to $7 per square foot. On the other hand, tile has a much broader range but is generally is also around $4 per square foot.

This means, that the two have the same average but shiplap has a much smaller range. Because the cost of boards is fairly consistent while the cost of tile ranges from $1 to $20 per square foot. So the type of tile matters.

There are many different ways to use shiplap in your kitchen as a backsplash. But there are also a few key points to take note of when choosing your design. These designs are great ways to get inspired with shiplap backsplashes.

Shiplap Backsplash Design Ideas

The continuing backsplash is a common one and it makes a huge difference. You can use it on the walls and as a backsplash, making sure to have the two continue instead of cut each other off. You want a constant flow.

White on white is a common way to do shiplap if you want to refrain from getting tagged with the “farmhouse” design style. Although shiplap is primarily for the farmhouse look, this is a way to make it look different.

If white on white isn’t your thing, you can go the other way and use a simple shiplap backsplash and a lot of other details in your kitchen. The backsplash doesn’t have to define the kitchen, it can accent it.

White Cabinets With White Shiplap Backsplash

Most people will never think about putting their shiplap vertical. But you can do it! It makes the kitchen look taller and completely transforms the purpose of the shiplap backsplash. Doesn’t it look unique?

Incorporating the ceiling into your backsplash design can be even more impactful than incorporating the walls. Ceilings are often neglected and forgotten. But if you use shiplap on them, then you can change this.

Installing shiplap isn’t as difficult as it seems. All you need are a few tools, the shiplap, and paint if you plan on painting your shiplap. Here are the steps you can take to install a shiplap on your own without a contractor.

Kitchen With Shiplap Backsplash

You can either use shiplap as a wall covering or you can install it over an existing wall covering, like drywall. If you have an existing wall, make sure it is clean and that all of the trim and moulding are removed.

If your wall isn’t white, you will need to paint it as shiplap will have a gap that will allow the color to pass through. So paint it the same color as your shiplap will be to avoid bright colors showing through.

The best way to find out how much shiplap you need is to measure the space after you remove any trim. Find the square footage of the area and then add about 10% to make sure that you don’t need any extra.

Faux Shiplap Backsplash With Peel 'n Stick Flooring

While most studs are 16-inches apart, you can’t rely on this measurement completely. Instead, either invest in a stud finder or look for visual studs. If this is your wall covering, you will already know where the studs are.

It’s very important that the first board you place is level. Use a good level and make sure it is level before you move on to the next one. Do this with the first few boards. The only one you can’t do it with is the top one.

The easiest way to begin securing the boards is to glue the first one down. But if you have a partner, this isn’t necessary. They can hold the board up while you screw it into the stud. From there, it’s easy as you can use the lower board to hold it up.

Installing A Shiplap Backsplash In The Kitchen:

If you are alone, you can use spaces to give that authentic look. because shiplap shouldn’t be sandwiched together. It should be slightly spaced instead. Use coins or spacers to do this.

Also, make sure that you stagger the boards. Cut one board in half and use it for the second row. Make a staggering pattern, being careful not to stairstep.

After you’ve installed your shiplap, all that’s left to do now is make it your own. So add your own personal touches to bring the entire room together. Choose shiplap backsplash styles that suit you and create a masterpiece.To say I was excited about this DIY update in my kitchen is an understatement. We’ve been in our home for 15 years, and finally, I’m getting the shiplap backsplash of my dreams in my kitchen. I weighed out the pros and cons of tile versus shiplap before the installation, and here’s what I found.

Vertical Shiplap...things That Make Me Happy

As an Amazon Associate, I earn from qualifying purchases and through other companies. You are not charged extra to use any of the links, but any income I make helps me create more amazing DIY projects to share with you! To see my full disclaimer, click here!

After careful research, I came up with a list of pros and cons of shiplap backsplash. I thought you might want to know too.

In the end, we opted to use the primed nickel gap shiplap boards we purchased from Home Depot. After the installation, it will be ready to paint.

Beautiful Shiplap Kitchen Backsplash

We did a few extra things with the shiplap that includes the arch over the sink that I won’t be going into detail about in today’s post, but I want you to pay close attention to that arched opening. It’s going to change. I have nothing against arches, but you be the judge and let me know what you think with the results.

That conversation between my hubby and me lasted for a few days until I convinced him that we could do this. I admit (not to him) that I sometimes don’t always know how we will accomplish our DIY projects, but there’s always YouTube. Our kitchen is small so that it couldn’t be that hard.

For this DIY shiplap kitchen backsplash project, I recommend having some skills and knowledge of power tools. To get the best results, you’ll need a table saw, jigsaw, and a finish nailer. See the complete list above if you missed it. Use the right tool for the right project.

Farmhouse Kitchen Backsplash Ideas For 2023

Do the math ahead of time to determine how many shiplap boards you will need to purchase for your project and allow for a few mistakes. You can always return any uncut material for a full refund.

Don’t miss this step! Be sure to mark the wood studs with a pencil on the backsplash wall before getting started. This will be your reference for nailing and can also be used if you choose to stagger the shiplap instead of using one continuous piece as we did.

The best advice I can give you with this DIY shiplap backsplash kitchen update is to measure twice and cut once. It’s good sound advice and will keep your budget in check.

Shiplap Kitchen Backsplash Ideas For Your Next Remodel

Start from the bottom of the cabinet and work your way up the wall when applying the shiplap. That way, if your boards don’t fit at the top, you can rip them the size, and the shiplap won’t be as noticeable at the top under the cabinets.

I cut each shiplap board and dry-fit them one by one into place first. The reasoning for this is that most walls are not square, and if you cut them all first, you’ll be making another trip to the home improvement store. My walls are not square.

For the electrical outlets, dry fit two pieces together (if the boards meet in the center of the outlet) and mark the area for the cutout. I used a jigsaw to cut an opening for the outlet carefully.

How To Use A Shiplap Kitchen Backsplash

Once you have your shiplap boards cut and dry fitted, apply a bead of liquid paneling to